[artshow_photo] Wanted to buy a stabar set for EZ Up

Ok, here ya go.
The 10-15 dollar fix.
Did this about 2 years ago and holds up fine.
 
Get (3) 1.5 inch pvc pipe
1 bag of sand 50-60lb cement. 
6 pvc t fittings.
The idas is to make the 3 pipes form a base around your tent. Like the stabar.
Cut enough pipe off so that the fittings plus pipe equal 10 ft.
 
Fill the pipe up with the fine sand cement. 1 bag worked for me.
Let it dry solid.
Now you have a weighted stabar setup.
 
When you set up the ezup just pull the bottom leg out and slide the t-fittings over the leg.
It will slide down to the bottom of the leg.
THe back wall legswill get 2 t-fittings for each leg.
1 more for the last leg.
Slide the legs back into place. The pin will let you pull the leg out and into the main top leg.
 
It adds about 60 more lbs for weight and keeps it nice and straight.
I have these plus my leg pipe weights on and have gone thru overnight storms with 50 knot gusts. Zero movement.
 
 

[Non-text portions of this message have been removed]

__._,_.___

Messages in this topic (2)

Recent Activity:

• New Members 15
• New Links 1

Donate to support the ArtShowPhoto Forum at
http://artshowphoto.com/support.htm

PLEASE READ....PLEASE TRIM POSTS!!! Keep quoted material short.
Repeat or create accurate subject lines.

If you want to advertise services related to art shows or photography, either in a forum post or on the resource web site, please contact the forum owner for permission.

Resource web site at
http://ArtShowPhoto.com