WD Black to be specific.
BK
On Fri, Dec 17, 2010 at 15:20, Mark Mattson <MarkM1_Erie@hotmail.com> wrote:
> Glad to see I'm not the only old phart left around here :)
>
> I actually just replaced a 100Gb WD IDE drive in my photo machine that has
> bearing whine that comes and goes...sounds almost like the start of a head
> crash (buzzy whine that comes and goes), but definitely bearing. The drive
> is going on 9 years old, which for any hard drive, is a VERY old one...I've
> seen most drives last on average 6 years on 24/7 use.
>
> I would strongly recommend staying well away from Seagate and Maxtor
> drives. Seagate now owns Maxtor, and I have had nothing but bad times with
> Maxtor products. Seagate was a good brand way back in the day, but their
> marriage with Maxtor makes me nervous about their products now, especially
> considering the aforementioned 7200.10 series drives.
>
> Stick with Western Digital...you can't go wrong.
>
> Mark
>
>
> ----- Original Message -----
> From: G. Armour Van Horn
> To: artshow_photo@yahoogroups.com
> Sent: Friday, December 17, 2010 2:43 PM
> Subject: Re: [artshow_photo] 24" IMAC hard drive replacement
>
>
>
> That's actually a cure for "stiction", a phenomenon in which the heads
> actually stuck to the face of the disk platters. I don't think I've seen
> a case of stiction or bearing failure in a hard drive for fifteen years.
> Desktop drives are all made with "non contact" bearings, it's nearly
> impossible for them to fail. The size of the heads is so small these
> days that stiction doesn't happen either, although it was a very real
> issue in the days of 5-20MB drives.
>
> Yes, I'm old enough to have actually had a 5MB disk with 14" platters,
> and used an 80MB 14" drive for a couple of years. That one weighed 95
> pounds, and the cables to connect it to the computer weighed five more.
> Those drives had the advantage that you could always just open the top
> of the drive and move the head by hand if it got stuck, as opposed 5.25"
> drives that tended to be sealed.
>
> Van
>
> On 17/12/2010 11:23 AM, Mark Mattson wrote:
> >
> > One old technician trick to add to this, if you have a spindle bearing
> > problem (where the drive doesn't spin up, or spins up very slowly):
> >
> > Place the failed drive into a ziploc bag, close it up, and put it in
> > the freezer for 24 hours. When you take it out, open the end of the
> > bag, and plug in the data and power cables...but leave to drive in the
> > bag, to keep condensation minimized as much as possible.
> >
> > If your trouble is a cranky spindle bearing, freezing the drive may
> > give you enough time to get data off of it due to the bearing
> > shrinking and freeing itself up for a time.
> >
> > I've used this many times to save data on my personal drives and those
> > of others when the bearings are the culprit.
> >
> > Mark
> >
>
> --
> ----------------------------------------------------------
> Sign up now for Quotes of the Day, a handful of quotations
> on a theme delivered every morning.
> Enlightenment! Daily, for free!
> mailto:twisted@whidbey.com?subject=Subscribe_QOTD
>
> For photography, web design, hosting, and maintenance,
> visit Van's home page: http://www.domainvanhorn.com/van/
> ----------------------------------------------------------
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Donate to support the ArtShowPhoto Forum at
> http://artshowphoto.com/support.htm
>
> PLEASE READ....PLEASE TRIM POSTS!!! Keep quoted material short.
> Repeat or create accurate subject lines.
>
> If you want to advertise services related to art shows or photography,
> either in a forum post or on the resource web site, please contact the forum
> owner for permission.
>
> Resource web site at
> http://ArtShowPhoto.com
> Yahoo! Groups Links
>
>
>
>
[Non-text portions of this message have been removed]
http://artshowphoto.com/support.htm
PLEASE READ....PLEASE TRIM POSTS!!! Keep quoted material short.
Repeat or create accurate subject lines.
If you want to advertise services related to art shows or photography, either in a forum post or on the resource web site, please contact the forum owner for permission.
Resource web site at
http://ArtShowPhoto.com
0 comments:
Post a Comment